PDFreactor PHP API Documentation

PDFreactor namespace: com\realobjects\pdfreactor\webservice\client

The PDFreactor object handles all interaction with the PDFreactor Web Service. Only one instance per web service is required and the instance is reusable for subsequent conversions. The following describes the methods that can be called on the PDFreactor instance.

PDFreactor()

Creates a new PDFreactor client instance. The PDFreactor Web Service URL http://localhost:9423/service/rest will be used.

PDFreactor(serviceUrl)

Creates a new PDFreactor client instance. The specified URL will be used as PDFreactor Web Service URL.

Parameters

serviceUrl → String: The URL to the PDFreactor Web Service.

convert(configuration) → Result

Converts the specified configuration into PDF or image.

Parameters

configuration → Configuration: The configuration.

Exceptions

Reasons:

No input document was specified in the configuration.
The supplied configuration was not valid for some reason. See the error message for details.
The version of the client that was used is outdated and no longer supported. This is only available for the PDFreactor REST wrapper clients.
The client failed an authorization check, e.g. because a supplied API key was invalid.
The supplied configuration was accepted by PDFreactor but could not be converted for some reason. See the error message for details.
No configuration was supplied to the operation.
The configuration could not be processed and should be re-checked.
The supplied configuration is valid, however the conversion could not be completed for some reason. See the error message for details.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

convertAsBinary(configuration) → Binary

Converts the specified configuration into PDF or image.

Parameters

configuration → Configuration: The configuration.

Exceptions

Reasons:

No input document was specified in the configuration.
The supplied configuration was not valid for some reason. See the error message for details.
The version of the client that was used is outdated and no longer supported. This is only available for the PDFreactor REST wrapper clients.
The client failed an authorization check, e.g. because a supplied API key was invalid.
The supplied configuration was accepted by PDFreactor but could not be converted for some reason. See the error message for details.
No configuration was supplied to the operation.
The configuration could not be processed and should be re-checked.
The supplied configuration is valid, however the conversion could not be completed for some reason. See the error message for details.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

convertAsBinary(configuration, stream)

Converts the specified configuration into PDF or image and writes it to the given stream.

Parameters

configuration → Configuration: The configuration.
stream → Handle: The stream to write to.

Exceptions

Reasons:

No input document was specified in the configuration.
The supplied configuration was not valid for some reason. See the error message for details.
The version of the client that was used is outdated and no longer supported. This is only available for the PDFreactor REST wrapper clients.
The client failed an authorization check, e.g. because a supplied API key was invalid.
The supplied configuration was accepted by PDFreactor but could not be converted for some reason. See the error message for details.
No configuration was supplied to the operation.
The configuration could not be processed and should be re-checked.
The supplied configuration is valid, however the conversion could not be completed for some reason. See the error message for details.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

convertAsync(configuration) → String

Converts the specified configuration asynchronously into PDF or image.

Parameters

configuration → Configuration: The configuration.

Exceptions

Reasons:

No input document was specified in the configuration.
The supplied configuration was not valid for some reason. See the error message for details.
The version of the client that was used is outdated and no longer supported. This is only available for the PDFreactor REST wrapper clients.
The client failed an authorization check, e.g. because a supplied API key was invalid.
The supplied configuration was accepted by PDFreactor but could not be converted for some reason. See the error message for details.
No configuration was supplied to the operation.
The configuration could not be processed and should be re-checked.
The supplied configuration is valid, however the conversion could not be completed for some reason. See the error message for details.
Asynchronous conversions are unavailable.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getProgress(documentId) → Progress

Gets the current progress of the conversion of the document with the given documentId.

Parameters

documentId → String: The documentId.

Exceptions

Reasons:

The client failed an authorization check, e.g. because a supplied API key was invalid.
Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getDocument(documentId) → Result

Retrieves the document with the given documentId from the PDFreactor service.

Parameters

documentId → String: The document ID.

Exceptions

Reasons:

The client failed an authorization check, e.g. because a supplied API key was invalid.
Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getDocumentMetadata(documentId) → Result

Retrieves the metadata of the document with the given documentId from the PDFreactor service. The result is the same as getDocument, however the actual document is not included.

Parameters

documentId → String: The document ID.

Exceptions

Reasons:

The client failed an authorization check, e.g. because a supplied API key was invalid.
Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getDocumentAsBinary(documentId) → Binary

Retrieves the document with the given documentId from the PDFreactor service. The document is returned as raw binary data.

Parameters

documentId → String: The document ID.

Exceptions

Reasons:

The client failed an authorization check, e.g. because a supplied API key was invalid.
Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

deleteDocument(documentId)

Deletes the document with the given documentId from the PDFreactor service.

Parameters

documentId → String: The document ID.

Exceptions

Reasons:

The client failed an authorization check, e.g. because a supplied API key was invalid.
Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getStatus()

Checks if the PDFreactor Web Service is responsive and is able to convert documents.

Exceptions

Reasons:

The client failed an authorization check, e.g. because a supplied API key was invalid.
The PDFreactor Web Service is running but not functional.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getVersion() → Version

Gets the version of the PDFreactor Web Service.

getDocumentUrl(documentId) → String

Returns the URL where the document with the given ID can be accessed.

Parameters

documentId → String: The document ID.

getProgressUrl(documentId) → String

Returns the URL where the progress of the document with the given ID can be accessed.

Parameters

documentId → String: The document ID.

headers → Array<String, String>

A collection of key-value-pairs representing the request headers that will be added to the HTTP request to the PDFreactor Web Service. This property is empty by default and additional headers can be added as required. Headers should only be added in special environments where it is necessary.

cookies → Array<String, String>

A collection of key-value-pairs representing the cookies that will be added to the HTTP request to the PDFreactor Web Service. This property is empty by default and additional cookies can be added as required. Cookies should only be added in special environments where it is necessary, e.g. when using a load balancer.

apiKey → String

The API key. Only required if the PDFreactor Web Service is so configured that only clients with a valid API key can access it.

Models

Configuration namespace: com\realobjects\pdfreactor\webservice\client

This class contains all options related to the PDF or image conversion. Only Configuration.document or Configuration.document is required, all other configuration settings are optional.

addAttachments → Boolean

Enables or disables attachments specified in style sheets.

The default value is false.

addBookmarks → Boolean

Enables or disables bookmarks in the PDF document.

The default value is false.

addComments → Boolean

Enables or disables comments in the PDF document.

The default value is false.

addLinks → Boolean

Enables or disables links in the PDF document.

The default value is false.

addOverprint → Boolean

Enables or disables overprinting.

The default value is false.

addPreviewImages → Boolean

Enables or disables embedding of image previews per page in the PDF document.

The default value is false.

addTags → Boolean

Enables or disables tagging of the PDF document.

The default value is false.

allowAnnotations → Boolean

Enables or disables the 'annotations' restriction in the PDF document.

The default value is false.

allowAssembly → Boolean

Enables or disables the 'assembly' restriction in the PDF document.

The default value is false.

allowCopy → Boolean

Enables or disables the 'copy' restriction in the PDF document.

The default value is false.

allowDegradedPrinting → Boolean

Enables or disables the 'degraded printing' restriction in the PDF document.

The default value is false.

allowFillIn → Boolean

Enables or disables the 'fill in' restriction in the PDF document.

The default value is false.

allowModifyContents → Boolean

Enables or disables the 'modify contents' restriction in the PDF document.

The default value is false.

allowPrinting → Boolean

Enables or disables the 'printing' restriction in the PDF document.

The default value is false.

allowScreenReaders → Boolean

Enables or disables the 'screen readers' restriction in the PDF document.

The default value is false.

appendLog → Boolean

Specifies whether or not the log data should be added to the PDF document.

The default value is false.

attachments → Array<Attachment>

Adds a file attachment to PDF document.

authenticationCredentials → KeyValuePair

Enables access to resources that are secured via Basic or Digest authentication.

author → String

Sets the value of the author field of the PDF document.

baseURL → String

Sets the base URL of the document.

To resolve relative URLs to absolute URLs a reference (base) URL is required. This reference URL is usually the system id of the document.

This method can be used to specify another reference URL. If this URL is not null then it will be used instead of the system id.

The default value is null.

bookletMode → BookletMode

Convenience method to set pages-per-sheet properties and page order in one step to create a booklet.

callbacks → Array<Callback>

Adds callbacks to the conversion which will be called at specific times. All callbacks perform a POST request to the specified URL with the specified content type and a certain model which depends on the callback event.

For each callback, you can specify a timeout. If no timeout is specified, the server's default timeout for callbacks is used. A value of zero or negative values indicate an infinite timeout, however the PDFreactor server may have a maximum timeout configured, in which case that will be the used value.

Some callbacks might be called regularly during the course of a conversion. For these callbacks you can specify an interval to control how frequently they are called.

cleanupTool → Cleanup

Sets the cleanup tool to use for documents with unparsable content.

The Cleanup constants can be used as value. The default value specified is Cleanup::CYBERNEKO.

The cleanup tool is only used for Doctype::XHTML. HTML5 utilizes an internal cleanup.

conformance → Conformance

Sets the conformance of the PDF.

The Conformance constants can be used as value. The default value specified is Conformance::PDF.

contentObserver → ContentObserver

Specifies parts of the document's content that should be observed and logged in greater detail. Data logged this way can be programmatically retrieved after the conversion has finished. The following can be observed:

Content exceeding boundary containers.

Use ExceedingContentAnalyze constants to specify which kind of content should be observed for exceeding content logging. The default value is ExceedingContentAnalyze::NONE.

Use ExceedingContentAgainst constants to specify that exceeding this content starts exceeding content logging. The default value is ExceedingContentAgainst::NONE.
Resources that could not be loaded.
URL connection attempts made by PDFreactor.

continuousOutput → ContinuousOutput

Enables the conversion of the input document into one image.

conversionName → String

Sets a name for the conversion. If a name is set, it will be logged at level "info". The name can be an arbitrary string but should be unique for every conversion or application so that the log output can be matched to a specific conversion or application later.

cookies → Array<KeyValuePair>

Adds a cookie to all outgoing HTTP connections. The parameters are URL encoded (see Configuration.rawCookies). If the key already exists, the pair is overwritten.

creator → String

Sets the value of creator field of the PDF document.

cssSettings → CssSettings

Specifies the behavior of PDFreactor regarding the support and validation of CSS properties and their declaration. The following modes can be set:

Do not validate at all, consider all declared style as valid. See CssPropertySupport::ALL
Validate all declared styles for properties only supported by PDFreactor. Properties only supported by third party products are not supported/taken as invalid. See CssPropertySupport::HTML
Validate all declared styles for properties supported by PDFreactor. Properties only supported by third party products are supported/taken as valid. See CssPropertySupport::HTML_THIRD_PARTY
All properties supported by third party products are supported/taken as valid. All declared styles for properties not supported by third party products but supported by PDFreactor will be validated. See CssPropertySupport::HTML_THIRD_PARTY_LENIENT

customDocumentProperties → Array<KeyValuePair>

Adds a custom property to the PDF document. An existing property of the same name will be replaced.

defaultColorSpace → ColorSpace

Sets whether to convert color key words to CMYK instead of RGB.

The ColorSpace constants can be used as value. The default value specified is ColorSpace::RGB.

disableFontEmbedding → Boolean

Sets whether fonts will not be embedded into the resulting PDF. Setting this to true will reduce the file size of the output document. However, the resulting PDF documents are no longer guaranteed to look identical on all systems.

The default value is false.

document → Binary | String

The input document. This can either be a URL string, XML or HTML source code string. Alternatively, the input document can be specified directly as Binary or as Base64-encoded string.

documentDefaultLanguage → String

Sets the language used for documents having no explicit language attribute set.

The language code is used to resolve the lang() selector correct and to determine the correct language used for hyphenation.

documentType → Doctype

Sets the document type.

The Doctype constants can be used to specify the document type. The default value specified is Doctype::AUTODETECT.

enableDebugMode → Boolean

Enables debug mode, which adds additional information to the output.

If enabled, exceptions during the conversion will not be thrown. In such a case, instead of a document a string containing the log and exeption will be returned.

encoding → String

Sets the encoding of the document.

If this value is set to null or it is empty then the encoding will be detected automatically.

The default value is null.

encryption → Encryption

Sets the encryption.

Use one of the Encryption constants to specify the encryption. The default value is Encryption::NONE.

errorPolicies → Array<ErrorPolicy>

Specifies error policies that will be used for the conversion. Depending on the policy, the conversion will fail if the appropriate criteria are not met.

fontAliases → Array<Font>

Registers an alias font family for an existing font.

This function is limited to fonts loaded automatically from system folders.

fontFallback → Array<String>

Sets a list of fallback font families used for character substitution. This list is iterated for characters that can not be displayed with any of the fonts specified via the CSS property font-family.

fonts → Array<Font>

Loads a font from a URL which can be used via the CSS property font-family.

forceGrayscaleImage → Boolean

If the output format is an image format, this setting controls whether a grayscale image should be returned. This can not be combined with transparency.

fullCompression → Boolean

Enables or disables full compression of the PDF document.

The default value is false.

httpsMode → HttpsMode

Sets the HTTPS mode. In closed environment lenient can be the preferred setting to avoid HTTPS issues that are not security critical

The default value specified is HttpsMode::STRICT.

ignoreAlpha → Boolean

Sets whether the alpha value of CSS RGBA colors is ignored. This can be used to avoid conformance issues in PDF/A-1.

integrationStyleSheets → Array<Resource>

Adds an integration style sheet to the document.

There are two ways to specify the style sheet:

Specifying the style sheet only using an URI.
Specifying the style sheet by the content of the style sheet and alternatively setting a URI to resolve relative elements. If no URI is specified then the system id/base URL of the document will be used.

javaScriptMode → JavaScriptMode

Sets the JavaScript Mode.

The default value specified is JavaScriptMode::DISABLED.

keepDocument → Boolean

If set to true prevents the document from being deleted from the PDFreactor Web Service after it has been accessed. This only works for asynchronous conversions.

keywords → String

Sets the value of the keywords field of the PDF document.

licenseKey → String

Sets the license key using a string. If the license key is set to null then PDFreactor looks for a 'licensekey.xml' file in the same directory where the 'PDFreactor.jar' file is located. If no license key could be found then PDFreactor runs in evaluation mode.

The default value is null.

logExceedingContent → LogExceedingContent

Deprecated

Deprecated as of PDFreactor 9. Use Configuration.contentObserver instead.

logLevel → LogLevel

Sets the log level.

Use one of the LogLevel constants to specify the log level.

The default value is LogLevel::NONE.

mediaFeatureValues → Array<MediaFeatureValue>

Defines the value of a Media Feature which is used to resolve CSS3 media queries.

mediaTypes → Array<String>

Sets the media types that are used to resolve CSS3 media queries.

Please note that this overrides the default media types of PDFreactor, which are:

print, paged, visual, bitmap, static, -ro-pdfreactor

mergeByteArray → Binary

Deprecated

Deprecated as of PDFreactor 9. Use Configuration.mergeDocuments instead.

mergeByteArrays → Array<byte[]>

Deprecated

Deprecated as of PDFreactor 9. Use Configuration.mergeDocuments instead.

mergeDocuments → Array<Resource>

This method sets external PDF documents which will be merged with the PDF document generated by the HTML source.

mergeMode → MergeMode

Sets the merge mode.

The following merge methods can be used:

append (MergeMode::APPEND)
prepend (MergeMode::PREPEND)
overlay above the content of the generated PDF (MergeMode::OVERLAY)
overlay below the content of the generated PDF (MergeMode::OVERLAY_BELOW)

The default value is MergeMode::APPEND.

mergeURL → String

Deprecated

Deprecated as of PDFreactor 9. Use Configuration.mergeDocuments instead.

mergeURLs → Array<String>

Deprecated

Deprecated as of PDFreactor 9. Use Configuration.mergeDocuments instead.

outputFormat → OutputFormat

Sets the output format. The default value is PDF. For image formats the width or height in pixels must be specified. When either dimension is <1 it is computed based on the other dimension and the aspect ratio of the input document.

outputIntent → OutputIntent

Sets the output intent including the identifier and the ICC profile to be embedded into the PDF.

Set either the profile URL or the profile data, not both. Certain PDF/X formats require neither, just a known identifier.

overlayRepeat → OverlayRepeat

If one of the documents of an overlay process is shorter than the other, this method allows repeating either its last page or all of its pages in order to overlay all pages of the longer document.

Use one of the OBERLAY_REPEAT_ constants to specify the overlay repeat. The default value is OverlayRepeat::NONE.

ownerPassword → String

Sets the owner password of the PDF document.

The default value is null.

pageOrder → PageOrder | String

Sets the page order of the direct result of the conversion.

If Configuration.mergeMode is set to MergeMode::ARRANGE, this method is also used to specify the position of inserted pages from an existing PDF.

A description of the syntax can be found in the manual.

pagesPerSheetProperties → PagesPerSheetProperties

Sets the properties of a sheet on which multiple pages are being arranged.

If cols or rows is less than 1, no pages-per-sheet processing is done. This is the case by default.

Use one of the PagesPerSheetDirection constants to specify the the direction. The default value is PagesPerSheetDirection::RIGHT_DOWN.

pdfScriptAction → Array<PdfScriptAction>

Sets a pair of trigger event and PDF script. The script is triggered on the specified event.

A PDF script is JavaScript that is executed by a PDF viewer (e.g. Adobe Reader). Note that most viewers do not support this feature.

PDF Scripts can also be set by using the proprietary CSS property pdf-script-action. More information on this property can be found in the manual.

Please note, that scripts set via CSS have a higher priority. If two scripts are registered on the same event, but one via API and the other via the CSS property, the script set in the CSS will override the other one.

pixelsPerInch → Integer

Sets the pixels per inch.

Changing this value changes the physical length of sizes specified in px (including those specified via HTML attributes).

The default value is 96ppi.

pixelsPerInchShrinkToFit → Boolean

Whether the pixels per inch should be adapted automatically to avoid content exceeding pages.

postTransformationDocumentType → Doctype

Sets the document type after the XSL-Transformations have been applied.

The Doctype constants can be used to specify the document type. The default value specified is Doctype::AUTODETECT.

printDialogPrompt → Boolean

Enables or disables a print dialog to be shown upon opening the generated PDF document by a PDF viewer.

The default value is false.

processingPreferences → Array<ProcessingPreferences>

Preferences that influence the conversion process without changing the output

Use the ProcessingPreferences constants to specify the processing preferences. By default no processing preference is set.

rawCookies → Array<KeyValuePair>

Adds a cookie to all outgoing HTTP connections. The parameters are not URL encoded (see Configuration.cookies). If the key already exists, the pair is overwritten.

requestHeaders → Array<KeyValuePair>

Adds a request header to all outgoing HTTP connections. If the key already exists, the pair is overwritten.

resourceRequestTimeout → Integer

Sets a timeout in milliseconds for requests to resources, such as HTTP requests to style sheets, images etc. If the server does not respond until the timeout, the request will be aborted and the resource will not be loaded.

A timeout of 0 means that the request will not time out. A negative value means that no timeout will be set. The default value is 60000 (1min).

signPDF → SignPDF

Sets a digital certificate to sign the newly created PDF.

Requires a keystore file. The included certificate may be self-signed.

Use the KeystoreType constants to specify the keystore type.

Use the SigningMode constants to specify the signing mode.

subject → String

Sets the value of the subject field of the PDF document.

throwLicenseExceptions → Boolean

Deprecated

Deprecated as of PDFreactor 9. Use Configuration.errorPolicies instead.

title → String

Sets the value of the title field of the PDF document.

userPassword → String

Sets the user password of the PDF document.

The default value is null.

userScripts → Array<Resource>

Adds an user script to the document.

There are two ways to specify the script:

Specifying the script only by an URI.
Specifying the script by the content of the script and alternatively setting a URI to resolve relative elements. If no URI is specified then the system id/base URL of the document will be used.

userStyleSheets → Array<Resource>

Adds a user style sheet to the document.

There are two ways to specify the style sheet:

Specifying the style sheet only using an URI.
Specifying the style sheet by the content of the style sheet and alternatively setting a URI to resolve relative elements. If no URI is specified then the system id/base URL of the document will be used.

viewerPreferences → Array<ViewerPreferences>

Sets the page layout and page mode preferences of the PDF.

Use the ViewerPreferences constants to specify the viewer preferences. By default no viewer preference is set.

xmp → Xmp

Sets custom XMP to be embedded into the PDF document.

If both content and URI are set to null no custom XMP is embedded. If priority is also set to XmpPriority::HIGH automatic generation of required XMP is also suppressed. This may cause output PDFs to not archive a specified conformance.

xsltMode → Boolean

Enables or disables XSLT transformations.

Set this value to true to enable XSLT transformations or to false to disable XSLT transformations.

The default value is false.

xsltStyleSheets → Array<Resource>

Adds an XSLT style sheet to the document.

There are two ways to specify the style sheet:

Specifying the style sheet only by an URI.
Specifying the style sheet by the content of the style sheet and alternatively setting a URI to resolve relative elements. If no URI is specified then the system id/base URL of the document will be used.

Attachment namespace: com\realobjects\pdfreactor\webservice\client

An object containing attachment data.

data → Binary: The binary content of the attachment. May be null.
description → String: The description of the attachment. If this is null the name is used.
name → String: The file name associated with the attachment. It is recommended to specify the correct file extension. If this is null the name is derived from the URL.
url → String: If data is null, the attachment will be retrieved from this URL. If this is "#" the input document URL is used instead.

BookletMode namespace: com\realobjects\pdfreactor\webservice\client

An object containing booklet mode data.

rtl → Boolean: Whether or not the reading order of the booklet should be right-to-left.
sheetMargin → String: The sheet margin as CSS margin value, e.g. 1in, 5cm, 10mm 20mm 10mm 30mm. null is interpreted as 0mm.
sheetSize → String: The size of the sheet as CSS value, e.g. A3, letter landscape, 15in 20in, 20cm 30cm.

Callback namespace: com\realobjects\pdfreactor\webservice\client

An object containing callback data.

contentType → ContentType: The content type of the payload that is posted.
interval → Integer: The interval in seconds at which to trigger repeating callbacks. Only applies CallbackType::PROGRESS.
timeout → Integer: An optional timeout for the callback. A value of zero or negative values are treated as an infinite timeout.
type → CallbackType: The event to trigger the callback.
url → String: The URL to call back.

Connection namespace: com\realobjects\pdfreactor\webservice\client

Object that describes a URL connection attempt of PDFreactor.

connected → Boolean

Whether a URL connection could be established by PDFreactor. If this is false, see Connection::error for details.

duration → Integer

The duration in milliseconds how long this connection remained open.

error → String

The error message if the connection could not be established.

method → String

The request method used by the underlying HTTP request (e.g. "GET", "POST", etc.) or null if this is not an HTTP connection or the connection could not be established.

protocol → String

The protocol of the URL connection.

requestHeaders → KeyValuePair

The request headers.

Note: If a header has multiple values, there will be one KeyValuePair for each value with the header name as key.

responseHeaders → KeyValuePair

The response headers.

Note: If a header has multiple values, there will be one KeyValuePair for each value with the header name as key.

statusCode → Integer

The response code for HTTP connections or 0 for all other connections.

statusMessage → String

The response message for the response code or null if the response code is 0 or the message could not be determined.

timestamp → Integer

The time stamp of this connection.

url → String

The URL.

ContentObserver namespace: com\realobjects\pdfreactor\webservice\client

An object containing specifications on which content should be observed.

connections → Boolean: Enables observation of URL connections done by PDFreactor.
exceedingContentAgainst → ExceedingContentAgainst: Enables observation of exceeding content either against the page edges, page content areas or containers.
exceedingContentAnalyze → ExceedingContentAnalyze: Enables observation of exceeding content and optionally of boxes.
missingResources → Boolean: Enables observation of resources that could not be loaded.

ContinuousOutput namespace: com\realobjects\pdfreactor\webservice\client

A object containing continuous output data.

height → Integer: Equivalent to the height of a browser window (view port). For values <1 the entire height of the document is used.
width → Integer: Equivalent to the width of a browser window (view port). Values <1 enable paginated output.

CssSettings namespace: com\realobjects\pdfreactor\webservice\client

An object containing settings of how CSS properties are supported.

supportQueryMode → CssPropertySupport: Adjusts the CSS property support behavior.
validationMode → CssPropertySupport: Adjusts the CSS property validation behavior.

ExceedingContent namespace: com\realobjects\pdfreactor\webservice\client

Object that describes one instance of content exceeding its page or parent.

bottom → Boolean: Returns whether the content exceeds the page at the bottom.
box → Boolean: Returns whether the exceeding content is a box instead of text or image content.
containerBottom → Integer: Returns the bottom coordinate of the the container box in the page in pixels. Depending on the settings this box may be the page
containerLeft → Integer: Returns the left coordinate of the the container box in the page in pixels. Depending on the settings this box may be the page
containerRight → Integer: Returns the right coordinate of the the container box in the page in pixels. Depending on the settings this box may be the page
containerTop → Integer: Returns the top coordinate of the the container box in the page in pixels. Depending on the settings this box may be the page
description → String: Returns a description of the content. In case of text content, the text is returned. In case of images the URL is returned if available.
exceedingBoxBottom → Integer: Returns the bottom coordinate of the the exceeding box in the page in pixels.
exceedingBoxLeft → Integer: Returns the left coordinate of the the exceeding box in the page in pixels.
exceedingBoxRight → Integer: Returns the right coordinate of the the exceeding box in the page in pixels.
exceedingBoxTop → Integer: Returns the top coordinate of the the exceeding box in the page in pixels.
html → String: Returns the HTML of the box that contains the exceeding content.
left → Boolean: Returns whether the content exceeds the page to the left.
pageBottom → Integer: Returns the bottom coordinate of the the page in pixels.
pageLeft → Integer: Returns the left coordinate of the the page in pixels.
pageNumber → Integer: Returns the number of the page that contains the exceeding content.
pageRight → Integer: Returns the right coordinate of the the page in pixels.
pageTop → Integer: Returns the top coordinate of the the page in pixels.
path → Integer: Returns an array of integers denoting the indexes of the ancestors of the DOM node corresponding to the box containing the exceeding content, starting from below the root node down to the element itself.
right → Boolean: Returns whether the content exceeds the page to the right.
summary → String: Returns a summary of this exceeding content object.
top → Boolean: Returns whether the content exceeds the page at the top.

Font namespace: com\realobjects\pdfreactor\webservice\client

An object containing font data.

bold → Boolean: Whether the alias will be labeled bold.
family → String: The alias name for that font.
italic → Boolean: Whether the alias will be labeled italic.
source → String: The source URL of the font (when adding new fonts) or the name of an existing font family (when creating an alias).

Info namespace: com\realobjects\pdfreactor\webservice\client

callbackUrl → String: If this object was created for a callback, this property indicates the callback's URL.
contentType → String: The content type of the resulting document as a MIME type string. Depends on what OutputType was set in the Configuration. If none was set, the content type defaults to "application/pdf".
conversionName → String: Returns the name of the conversion if it was specified via Configuration.conversionName.
documentId → String: The document ID of the conversion. This ID can be used to poll the progress or retrieve the result.
documentUrl → String: The relative URL to the location where you can download the generated document once it is finished.
startDate → Date: The date and time when the conversion was started on the server.

KeyValuePair namespace: com\realobjects\pdfreactor\webservice\client

An object containing a key-value-pair.

key → String: The key
value → String: The value

Log namespace: com\realobjects\pdfreactor\webservice\client

records → Array<Record>: The log records.

LogExceedingContent namespace: com\realobjects\pdfreactor\webservice\client

An object containing data for logging exceeding content.

logExceedingContentAgainst → ExceedingContentAgainst: Enables logging of exceeding content either against the page edges, page content areas or containers.
logExceedingContentAnalyze → ExceedingContentAnalyze: Enables logging of exceeding content and optionally of boxes.

LogRecord namespace: com\realobjects\pdfreactor\webservice\client

level → Integer: The level of the record.
message → String: The logged message.
timestamp → Integer: The timestamp.

MediaFeatureValue namespace: com\realobjects\pdfreactor\webservice\client

An object containing media feature data.

mediaFeature → MediaFeature: The media feature.
value → String: The value that is associated with the given media feature.

MissingResource namespace: com\realobjects\pdfreactor\webservice\client

Object that describes a missing resource.

message → String: The message indicating why the resource could not be found.
resource → String: The resource identifier. Usually a URL string.
type → ResourceType: The type of resource (style sheet, image, etc.).

OutputFormat namespace: com\realobjects\pdfreactor\webservice\client

An object containing output data.

height → Integer: The height of the output in pixels (image formats only). Values <1 will be computed based on the specified width and the aspect ratio of the input document.
multiImage → Boolean: Indicates whether the image output will be paginated into multiple images.
type → OutputType: the output format. See OutputType constants
width → Integer: The with of the output in pixels (image formats only). Values <1 will be computed based on the specified height and the aspect ratio of the input document.

OutputIntent namespace: com\realobjects\pdfreactor\webservice\client

An object containing data for an output intents.

data → Binary: The profile data
identifier → OutputIntentDefaultProfile | String: The identifier
url → String: The profile URL

PagesPerSheetProperties namespace: com\realobjects\pdfreactor\webservice\client

An object containing data for pages per sheet properties.

cols → Integer: The number of columns per sheet.
direction → PagesPerSheetDirection: The direction in which the pages are ordered on a sheet.
rows → Integer: The number of rows per sheet.
sheetMargin → String: The sheet margin as CSS margin, e.g. 1in, 5cm, 10mm 20mm 10mm 30mm. null is interpreted as 0mm.
sheetSize → String: The sheet size as CSS size, e.g. A4, letter landscape, 15in 20in, 20cm 30cm.
spacing → String: The horizontal and vertical space between pages on a sheet as CSS value, e.g. 1in, 5mm 2mm. null is interpreted as 0mm.

PdfScriptAction namespace: com\realobjects\pdfreactor\webservice\client

An object containing PDF script data.

script → String: The script source that should be executed.
triggerEvent → PdfScriptTriggerEvent: The event on which the script is executed. Value is a PdfScriptTriggerEvent constant.

Progress namespace: com\realobjects\pdfreactor\webservice\client

callbackUrl → String: If this object was created for a callback, this property indicates the callback's URL.
contentType → String: The content type of the resulting document as a MIME type string. Depends on what OutputType was set in the Configuration. If none was set, the content type defaults to "application/pdf".
conversionName → String: Returns the name of the conversion if it was specified via Configuration.conversionName.
documentId → String: The document ID of the conversion. This ID can be used to poll the progress or retrieve the result.
documentUrl → String: The relative URL to the location where you can download the generated document once it is finished.
finished → Boolean: Indicates whether the conversion is finished yet.
log → Log: The log of the conversion.
progress → Integer: The current progress of the conversion. The value is between 0 and 100.
startDate → Date: The date and time when the conversion was started on the server.

Resource namespace: com\realobjects\pdfreactor\webservice\client

An object containing data for external resources such as style sheets.

beforeDocumentScripts → Boolean: Use true to cause PDFreactor to run the script before all scripts inside the document and false to run it after. Only supported for JavaScript-type resources.
content → String: The content of the resource. Only supported for Style Sheet- and Script-type resources.
data → Binary: The binary data of the resource.
uri → String: The URI of the resource.

Result namespace: com\realobjects\pdfreactor\webservice\client

The result of a PDF or image conversion.

callbackUrl → String

If this object was created for a callback, this property indicates the callback's URL.

connections → Connection

Provides a log about all URL connections attempted by PDFreactor, including information about HTTP request and result, should the connection be an HTTP or HTTPS connection. Depends on the mode set via Configuration.contentObserver.

contentType → String

The content type of the resulting document as a MIME type string. Depends on what OutputType was set in the Configuration. If none was set, the content type defaults to "application/pdf".

conversionName → String

Returns the name of the conversion if it was specified via Configuration.conversionName.

document → Binary

The resulting PDF or image.

This is not present if only the document's metadata was retrieved.

Alternatively, the input document can be specified directly as Binary or as Base64-encoded string.

documentArray → Array<Binary>

The resulting image as a collection of separate images, each representing a single page. This property is only present if the configuration option "multiImage" was set to true.

This is also not present if only the document's metadata was retrieved.

documentId → String

The document ID of the conversion. This ID can be used to poll the progress or retrieve the result.

documentUrl → String

The relative URL to the location where you can download the generated document once it is finished.

endDate → Date

The date and time when the conversion was finished on the server.

error → String

Returns the error messages that might have been generated during rendering.

exceedingContents → ExceedingContent

Provides information about content exceeding its page or parent. Depends on the mode set via "logExceedingContents".

javaScriptExports → String

Returns data that has been exported from document JavaScript via exports if set, null otherwise. If the JavaScript data is not a string, it will be converted to JSON. If the data can't be converted, a generic string representation is used or null if none is available.

log → Log

Returns the log messages generated during rendering based on the log level.

missingResources → MissingResource

Provides information about resources that could not be loaded during the conversion. Depends on the mode set via Configuration.contentObserver.

numberOfPages → Integer

Returns the number of pages of the document after conversion.

numberOfPagesLiteral → Integer

Returns the number of pages of the resulting PDF (including, e.g., merge operations), otherwise it will return the number pages of the laid out input document.

startDate → Date

The date and time when the conversion was started on the server.

ScriptResource namespace: com\realobjects\pdfreactor\webservice\client

Deprecated as of PDFreactor 9. Use Resource instead.

beforeDocumentScripts → Boolean: Use true to cause PDFreactor to run the script before all scripts inside the document and false to run it after. Only supported for JavaScript-type resources.
content → String: The content of the resource. Only supported for Style Sheet- and Script-type resources.
data → Binary: The binary data of the resource.
uri → String: The URI of the resource.

SignPDF namespace: com\realobjects\pdfreactor\webservice\client

An object containing data for signing the PDF.

keyAlias → String: The alias of the certificate included in the keystore to be used to sign the PDF.
keystorePassword → String: The password of the keystore.
keystoreType → KeystoreType: The format of the keystore, i.e. pkcs12 or jks. Use one of the KeystoreType constants as value.
keystoreURL → String: The URL to the keystore file.
signingMode → SigningMode: The mode that is used to sign the PDF, i.e. self-signed, Windows certificate or VeriSign. Use one of the SigningMode constants as value.

Version namespace: com\realobjects\pdfreactor\webservice\client

build → Integer: The build number.
label → String: The label of the version.
major → Integer: The major version.
micro → Integer: The micro version.
minor → Integer: The minor version.
revision → String: The revision number.

Xmp namespace: com\realobjects\pdfreactor\webservice\client

An object containing XMP data.

content → String: XMP, as an XML string, to be embedded into the PDF document.
priority → XmpPriority: Priority of this XMP over XMP generated automatically for the conformance requirements of certain output formats.
uri → String: URI to XMP to be embedded into the PDF document, if content is null.

Constants

CallbackType namespace: com\realobjects\pdfreactor\webservice\client

An enum containing callback type constants.

FINISH

This callback is called when the conversion is finished.

Allowed content types: ContentType::JSON, ContentType::XML, ContentType::TEXT.
Payload model: Result. The object returned will only contain the metadata, not the document data. The document has to be retrieved actively from the server. If the content type is ContentType::TEXT, only the document ID will be posted.

PROGRESS

This callback is called regularly to inform on the progress of the conversion.

Allowed content types: ContentType::JSON, ContentType::XML, ContentType::TEXT.
Payload model: Progress. If the content type is ContentType::TEXT, only the progress percentage will be posted.
Interval property applies.

START

This callback is called when the conversion is started.

Allowed content types: ContentType::JSON, ContentType::XML, ContentType::TEXT.
Payload model: Info. If the content type is ContentType::TEXT, only the document ID will be posted.

ContentType namespace: com\realobjects\pdfreactor\webservice\client

An enum containing content type constants.

BINARY: Content type BINARY, corresponds with "application/octet-stream" MIME type.
BMP: Content type BMP, corresponds with "image/bmp" MIME type.
GIF: Content type GIF, corresponds with "image/gif" MIME type.
HTML: Content type HTML, corresponds with "text/html" MIME type.
JPEG: Content type JPEG, corresponds with "image/jpeg" MIME type.
JSON: Content type JSON, corresponds with "application/json" MIME type.
NONE: Content type NONE, i.e. no content.
PDF: Content type PDF, corresponds with "application/pdf" MIME type.
PNG: Content type PNG, corresponds with "image/png" MIME type.
TEXT: Content type TEXT, corresponds with "text/plain" MIME type.
TIFF: Content type TIFF, corresponds with "image/tiff" MIME type.
XML: Content type XML, corresponds with "application/xml" MIME type.

Cleanup namespace: com\realobjects\pdfreactor\webservice\client

An enum containing cleanup constants.

CYBERNEKO: Indicates that the CyberNeko HTML parser will be used to perform a cleanup when loading a non-well-formed document.
JTIDY: Indicates that JTidy will be used to perform a cleanup when loading a non-well-formed document.
NONE: Indicates that no cleanup will be performed when loading a document. If the loaded document is not well-formed, an exception will be thrown.
TAGSOUP: Indicates that tagsoup will be used to perform a cleanup when loading a non-well-formed document.

ColorSpace namespace: com\realobjects\pdfreactor\webservice\client

An enum containing color space constants.

CMYK: The color space CMYK
RGB: The color space RGB

Conformance namespace: com\realobjects\pdfreactor\webservice\client

An enum containing conformance constants.

PDF: PDF with no additional restrictions (default)
PDFA1A: PDF/A-1a (ISO 19005-1:2005 Level A)
PDFA1A_PDFUA1: PDF/A-1a + PDF/UA-1 ....
PDFA1B: PDF/A-1b (ISO 19005-1:2005 Level B)
PDFA2A: PDF/A-2a (ISO 19005-2:2011 Level A)
PDFA2A_PDFUA1: PDF/A-2a + PDF/UA-1 ....
PDFA2B: PDF/A-2b (ISO 19005-2:2011 Level B)
PDFA2U: PDF/A-2u (ISO 19005-2:2011 Level U)
PDFA3A: PDF/A-3a (ISO 19005-3:2012 Level A)
PDFA3A_PDFUA1: PDF/A-3a + PDF/UA-1 ....
PDFA3B: PDF/A-3b (ISO 19005-3:2012 Level B)
PDFA3U: PDF/A-3u (ISO 19005-3:2012 Level U)
PDFUA1: PDF/UA-1 (ISO ...)
PDFX1A_2001: PDF/X-1a:2001 (ISO 15930-1:2001)
PDFX1A_2003: PDF/X-1a:2003 (ISO 15930-4:2003)
PDFX3_2002: PDF/X-3:2002 (ISO 15930-3:2002)
PDFX3_2003: PDF/X-3:2003 (ISO 15930-6:2003)
PDFX4: PDF/X-4 (ISO 15930-7:2008)
PDFX4P: PDF/X-4p (ISO 15930-7:2008)

CssPropertySupport namespace: com\realobjects\pdfreactor\webservice\client

An enum comtaining CSS property support mode constants.

ALL: Indicates that all style declarations are considered valid disregarding the possibility of improper rendering; valid values may be overwritten by invalid style declarations.
HTML: Indicates that all values set in style declarations will be validated as long as PDFreactor supports the corresponding property. Style declarations for properties not supported by PDFreactor are taken as invalid.
HTML_THIRD_PARTY: Indicates that all values set in style declarations will be validated as long as PDFreactor supports the corresponding property. Style declarations for properties not supported by PDFreactor but by third party products are taken as valid.
HTML_THIRD_PARTY_LENIENT: Indicates that all values set in style declarations will be taken as valid if a third party product supports the corresponding property. Style declarations for properties not supported by any third party product but supported by PDFreactor will be validated.

Doctype namespace: com\realobjects\pdfreactor\webservice\client

An enum containing document type constants.

AUTODETECT: Indicates that the document type will be detected automatically. A document has the type Doctype::HTML5 if the name of the root element is "html" (ignoring case considerations). In all other cases the document type is Doctype::XML.
HTML5: Indicates that the document type will be set to HTML5. The HTML default style sheet is used and the document is loaded regarding style elements, style attributes and link stylesheets.
XHTML: Indicates that the document type will be set to XHTML. The HTML default style sheet is used and the document is loaded regarding style elements, style attributes and link stylesheets.
XML: Indicates that the document type will be set to generic XML. No default style sheet is used and the document is loaded as is without regards to style elements or attributes.

Encryption namespace: com\realobjects\pdfreactor\webservice\client

An enum containing encryption constants.

NONE: Indicates that the document will not be encrypted. If encryption is disabled then no user password and no owner password can be used.
TYPE_128: Indicates that the document will be encrypted using RC4 128 bit encryption. For normal purposes this value should be used.
TYPE_40: Indicates that the document will be encrypted using RC4 40 bit encryption.

ErrorPolicy namespace: com\realobjects\pdfreactor\webservice\client

An enum containing error policies.

LICENSE

Whether an exception should be thrown when no legal full license key is set. This allows to programmatically ensure that documents are not altered due to license issues.

The default value is false.

MISSING_RESOURCE

Whether an exception should be thrown when resources could not be loaded.

ExceedingContentAgainst namespace: com\realobjects\pdfreactor\webservice\client

An enum containing constants for logging exceeding content against.

NONE: Do not log exceeding content
PAGE_BORDERS: Log content exceeding the edges of its page
PAGE_CONTENT: Log content exceeding its page content area (overlaps the page margin)
PARENT: Log content exceeding its container

ExceedingContentAnalyze namespace: com\realobjects\pdfreactor\webservice\client

An enum containing constants for analyzing exceeding content.

CONTENT: Log exceeding content
CONTENT_AND_BOXES: Log exceeding content and all boxes
CONTENT_AND_STATIC_BOXES: Log exceeding content and boxes without absolute positioning
NONE: Do not log exceeding content

HttpsMode namespace: com\realobjects\pdfreactor\webservice\client

An enum containing HTTPS mode constants.

LENIENT: Indicates lenient HTTPS behavior. This means that many certificate issues are ignored.
STRICT: Indicates strict HTTPS behavior. This matches the default behavior of Java.

JavaScriptMode namespace: com\realobjects\pdfreactor\webservice\client

An enum containing JavaScript mode constants.

DISABLED: Indicates that JavaScript is disabled.
ENABLED: Indicates that JavaScript is enabled.
ENABLED_NO_LAYOUT: Indicates that JavaScript is enabled, without access to layout data.
ENABLED_REAL_TIME: Indicates that JavaScript is enabled, without converter-specific optimizations to timeouts and intervals. This mode is significantly more time consuming and should only be used when no other mode provides the expected results.
ENABLED_TIME_LAPSE: Indicates that JavaScript is enabled, with time stamps increasing more quickly. This makes some kinds of JS based animations (e.g. when using jQuery) finish immediately, which has the same effect as JavaScriptMode::ENABLED_REAL_TIME, but is significantly faster. Only getTime is affected by this.

KeystoreType namespace: com\realobjects\pdfreactor\webservice\client

An enum containing keystore type constants.

JKS: Keystore type "jks"
PKCS12: Keystore type "pkcs12"

LogLevel namespace: com\realobjects\pdfreactor\webservice\client

An enum containing log level constants.

DEBUG: Indicates that debug, info, warn and fatal log events will be logged.
FATAL: Indicates that only fatal log events will be logged.
INFO: Indicates that info, warn and fatal log events will be logged.
NONE: Indicates that no log events will be logged.
PERFORMANCE: Indicates that all log events will be logged.
WARN: Indicates that warn and fatal log events will be logged.

MediaFeature namespace: com\realobjects\pdfreactor\webservice\client

An enum containing media feature constants.

ASPECT_RATIO

CSS 3 Media Feature describing the aspect ratio of the page content.

By default, this value is computed using the values of MediaFeature::WIDTH and MediaFeature::HEIGHT. Setting a specific value does override the computed value.

COLOR

CSS 3 Media Feature describing the number of bits per color component.

Default value is 8.

COLOR_INDEX

CSS 3 Media Feature describing the number of entries in the color lookup table.

Default value is 0, as there is no color lookup table.

DEVICE_ASPECT_RATIO

CSS 3 Media Feature describing the aspect ratio of the page.

By default, this value is computed using the values of MediaFeature::DEVICE_WIDTH and MediaFeature::DEVICE_HEIGHT. Setting a specific value does override the computed value.

DEVICE_HEIGHT

CSS 3 Media Feature describing the height of the page.

The default height is that of a DIN A4 page (297mm).

DEVICE_WIDTH

CSS 3 Media Feature describing the width of the page.

The default width is that of a DIN A4 page (210mm).

GRID

CSS 3 Media Feature defining whether the output is grid-based.

Default value 0, as PDFs are not grid-based.

HEIGHT

CSS 3 Media Feature height of page content.

The default height is that of a DIN A4 page with 1cm margin (277mm).

MONOCHROME

CSS 3 Media Feature describing the number of bits per pixel in a monochrome frame buffer.

Default value is 0, as the device is not monochrome.

ORIENTATION

CSS 3 Media Feature describing the page orientation.

By default, this value is computed using the values of MediaFeature::WIDTH and MediaFeature::HEIGHT. Setting a specific value does override the computed value.

Valid values are "portrait" or "landscape"

RESOLUTION

CSS 3 Media Feature describing the resolution of the output device.

This also defines the value of the devicePixelRatio property available from JavaScript.

Default value is 2dppx.

WIDTH

CSS 3 Media Feature width of page content.

The default width is that of a DIN A4 page with 1cm margin (190mm).

MergeMode namespace: com\realobjects\pdfreactor\webservice\client

An enum containing merge mode constants.

APPEND: Default merge mode: Append converted document to existing PDF
ARRANGE: Advanced merge mode: Allows to insert specific pages from existing PDFs into the converted document. This is done via a special syntax of Configuration.pageOrder.
OVERLAY: Alternate merge mode (overlay): Adding converted document above the existing PDF
OVERLAY_BELOW: Alternate merge mode (overlay): Adding converted document below the existing PDF
PREPEND: Alternate merge mode: Prepend converted document to existing PDF

OutputIntentDefaultProfile namespace: com\realobjects\pdfreactor\webservice\client

An enum containing default profiles for output intents.

FOGRA39: "Coated FOGRA39" output intent default profile
GRACOL: "Coated GRACoL 2006" output intent default profile
IFRA: "ISO News print 26% (IFRA)" output intent default profile
JAPAN: "Japan Color 2001 Coated" output intent default profile
JAPAN_NEWSPAPER: "Japan Color 2001 Newspaper" output intent default profile
JAPAN_UNCOATED: "Japan Color 2001 Uncoated" output intent default profile
JAPAN_WEB: "Japan Web Coated (Ad)" output intent default profile
SWOP: "US Web Coated (SWOP) v2" output intent default profile
SWOP_3: "Web Coated SWOP 2006 Grade 3 Paper" output intent default profile

OutputType namespace: com\realobjects\pdfreactor\webservice\client

An enum containing output format constants.

BMP: BMP output format
GIF: GIF output format
JPEG: JPEG output format
PDF: PDF output format
PNG: PNG output format (using Java Image I/O)
PNG_AI: PNG output format (using Apache Imaging)
PNG_TRANSPARENT: Transparent PNG output format (using Java Image I/O)
PNG_TRANSPARENT_AI: Transparent PNG output format (using Apache Imaging)
TIFF_CCITT_1D: Monochrome CCITT 1D compressed TIFF output format
TIFF_CCITT_GROUP_3: Monochrome CCITT Group 3 compressed TIFF output format
TIFF_CCITT_GROUP_4: Monochrome CCITT Group 4 compressed TIFF output format
TIFF_LZW: LZW compressed TIFF output format
TIFF_PACKBITS: PackBits compressed TIFF output format
TIFF_UNCOMPRESSED: Uncompressed TIFF output format

OverlayRepeat namespace: com\realobjects\pdfreactor\webservice\client

An object containing data for repeating overlays.

ALL_PAGES: All pages of the shorter document are repeated, to overlay all pages of the longer document
LAST_PAGE: Last page of the shorter document is repeated, to overlay all pages of the longer document
NONE: No pages of the shorter document are repeated, leaving some pages of the longer document without overlay
TRIM: The resulting PDF is trimmed to the number of pages of the shorter document

PageOrder namespace: com\realobjects\pdfreactor\webservice\client

An enum containing pre-defined page orders.

BOOKLET: Page order mode to arrange all pages in booklet order
BOOKLET_RTL: Page order mode to arrange all pages in right-to-left booklet order
EVEN: Page order mode to keep even pages only
ODD: Page order mode to keep odd pages only
REVERSE: Page order mode to reverse the page order

PagesPerSheetDirection namespace: com\realobjects\pdfreactor\webservice\client

An enum containing constants for pages per sheet directions.

DOWN_LEFT: Arranges the pages on a sheet from top to bottom and right to left.
DOWN_RIGHT: Arranges the pages on a sheet from top to bottom and left to right.
LEFT_DOWN: Arranges the pages on a sheet from right to left and top to bottom.
LEFT_UP: Arranges the pages on a sheet from right to left and bottom to top.
RIGHT_DOWN: Arranges the pages on a sheet from left to right and top to bottom.
RIGHT_UP: Arranges the pages on a sheet from left to right and bottom to top.
UP_LEFT: Arranges the pages on a sheet from bottom to top and right to left.
UP_RIGHT: Arranges the pages on a sheet from bottom to top and left to right.

PdfScriptTriggerEvent namespace: com\realobjects\pdfreactor\webservice\client

An enum containing trigger events for PDF scripts.

AFTER_PRINT: This event is triggered after the PDF has been printed by the viewer application.
AFTER_SAVE: This event is triggered after the PDF has been saved by the viewer application.
BEFORE_PRINT: This event is triggered before the PDF is printed by the viewer application.
BEFORE_SAVE: This event is triggered before the PDF is saved by the viewer application.
CLOSE: This event is triggered when the PDF is closed by the viewer application.
OPEN: This event is triggered when the PDF is opened in the viewer application.

ProcessingPreferences namespace: com\realobjects\pdfreactor\webservice\client

An enum containing constants for processing preferences.

SAVE_MEMORY_IMAGES: Processing preferences flag for the memory saving mode for images.

SigningMode namespace: com\realobjects\pdfreactor\webservice\client

An enum containing signing mode constants.

SELF_SIGNED: Signing mode for self-signed certificates.
VERISIGN_SIGNED: Signing mode for VeriSign certificates.
WINCER_SIGNED: Signing mode for Windows certificates.

ViewerPreferences namespace: com\realobjects\pdfreactor\webservice\client

An object containing constants for viewer preferences.

CENTER_WINDOW: Position the document's window in the center of the screen.
DIRECTION_L2R: Position pages in ascending order from left to right.
DIRECTION_R2L: Position pages in ascending order from right to left.
DISPLAY_DOC_TITLE: Display the document's title in the top bar.
DUPLEX_FLIP_LONG_EDGE: Print dialog default setting: duplex (long edge)
DUPLEX_FLIP_SHORT_EDGE: Print dialog default setting: duplex (short edge)
DUPLEX_SIMPLEX: Print dialog default setting: simplex
FIT_WINDOW: Resize the document's window to fit the size of the first displayed page.
HIDE_MENUBAR: Hide the viewer application's menu bar when the document is active.
HIDE_TOOLBAR: Hide the viewer application's tool bars when the document is active.
HIDE_WINDOW_UI: Hide user interface elements in the document's window.
NON_FULLSCREEN_PAGE_MODE_USE_NONE: Show no panel on exiting full-screen mode. Has to be combined with ViewerPreferences::PAGE_MODE_FULLSCREEN.
NON_FULLSCREEN_PAGE_MODE_USE_OC: Show optional content group panel on exiting full-screen mode. Has to be combined with ViewerPreferences::PAGE_MODE_FULLSCREEN.
NON_FULLSCREEN_PAGE_MODE_USE_OUTLINES: Show bookmarks panel on exiting full-screen mode. Has to be combined with ViewerPreferences::PAGE_MODE_FULLSCREEN.
NON_FULLSCREEN_PAGE_MODE_USE_THUMBS: Show thumbnail images panel on exiting full-screen mode. Has to be combined with ViewerPreferences::PAGE_MODE_FULLSCREEN.
PAGE_LAYOUT_ONE_COLUMN: Display the pages in one column.
PAGE_LAYOUT_SINGLE_PAGE: Display one page at a time. (default)
PAGE_LAYOUT_TWO_COLUMN_LEFT: Display the pages in two columns, with odd numbered pages on the left.
PAGE_LAYOUT_TWO_COLUMN_RIGHT: Display the pages in two columns, with odd numbered pages on the right.
PAGE_LAYOUT_TWO_PAGE_LEFT: Display two pages at a time, with odd numbered pages on the left.
PAGE_LAYOUT_TWO_PAGE_RIGHT: Display two pages at a time, with odd numbered pages on the right.
PAGE_MODE_FULLSCREEN: Switch to fullscreen mode on startup.
PAGE_MODE_USE_ATTACHMENTS: Show attachments panel on startup.
PAGE_MODE_USE_NONE: Show no panel on startup.
PAGE_MODE_USE_OC: Show optional content group panel on startup.
PAGE_MODE_USE_OUTLINES: Show bookmarks panel on startup.
PAGE_MODE_USE_THUMBS: Show thumbnail images panel on startup.
PICKTRAYBYPDFSIZE_FALSE: Print dialog default setting: do not pick tray by PDF size
PICKTRAYBYPDFSIZE_TRUE: Print dialog default setting: pick tray by PDF size
PRINTSCALING_APPDEFAULT: Print dialog default setting: set scaling to application default value.
PRINTSCALING_NONE: Print dialog default setting: disabled scaling

XmpPriority namespace: com\realobjects\pdfreactor\webservice\client

An enum containing the priority for XMP.

HIGH: Embed XMP ignoring requirments of the output format. This may cause output PDFs to not archive a specified conformance.
LOW: Embed XMP if the output format does not have XMP requirments.
NONE: Do not embed XMP.

ResourceType namespace: com\realobjects\pdfreactor\webservice\client

Indicates the type of resource.

FONT: A font.
IFRAME: An iframe.
IMAGE: An image.
OBJECT: An embedded object.
RUNNING_DOCUMENT: A running document.
SCRIPT: A script.
STYLESHEET: A style sheet.
UNKNOWN: An unknown resource type.