PDFreactor PHP API Documentation

PDFreactor

The PDFreactor object handles all interaction with the PDFreactor Web Service. Only one instance per web service is required and the instance is reusable for subsequent conversions. The following describes the methods that can be called on the PDFreactor instance.

PDFreactor()

Creates a new PDFreactor client instance. The PDFreactor Web Service URL http://localhost:9423/service/rest will be used.

PDFreactor(serviceUrl)

Creates a new PDFreactor client instance. The specified URL will be used as PDFreactor Web Service URL.

Parameters

serviceUrl → String: The URL to the PDFreactor Web Service.

convert(configuration) → Result

Converts the specified configuration into PDF or image.

Parameters

configuration → Configuration: The configuration.

Exceptions

Reasons:

No input document was specified in the configuration.
The supplied configuration was not valid for some reason. See the error message for details.
The supplied configuration was accepted by PDFreactor but could not be converted for some reason. See the error message for details.
No configuration was supplied to the operation.
The configuration could not be processed and should be re-checked.
The supplied configuration is valid, however the conversion could not be completed for some reason. See the error message for details.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

convertAsBinary(configuration) → Binary

Converts the specified configuration into PDF or image.

Parameters

configuration → Configuration: The configuration.

Exceptions

Reasons:

No input document was specified in the configuration.
The supplied configuration was not valid for some reason. See the error message for details.
The supplied configuration was accepted by PDFreactor but could not be converted for some reason. See the error message for details.
No configuration was supplied to the operation.
The configuration could not be processed and should be re-checked.
The supplied configuration is valid, however the conversion could not be completed for some reason. See the error message for details.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

convertAsync(configuration) → String

Parameters

configuration → Configuration: The configuration.

Exceptions

Reasons:

No input document was specified in the configuration.
The supplied configuration was not valid for some reason. See the error message for details.
The supplied configuration was accepted by PDFreactor but could not be converted for some reason. See the error message for details.
No configuration was supplied to the operation.
The configuration could not be processed and should be re-checked.
The supplied configuration is valid, however the conversion could not be completed for some reason. See the error message for details.
Asynchronous conversions are unavailable.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getProgress(documentId) → Progress

Gets the current progress of the conversion of the document with the given documentId.

Parameters

documentId → String: The documentId.

Exceptions

Reasons:

Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getDocument(documentId) → Result

Retrieves the document with the given documentId from the PDFreactor service.

Parameters

documentId → String: The document ID.

Exceptions

Reasons:

Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getDocumentAsBinary(documentId) → Binary

Retrieves the document with the given documentId from the PDFreactor service. The document is returned as raw binary data.

Parameters

documentId → String: The document ID.

Exceptions

Reasons:

Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

deleteDocument(documentId)

Deletes the document with the given documentId from the PDFreactor service.

Parameters

documentId → String: The document ID.

Exceptions

Reasons:

Conversion does not exist
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getStatus()

Checks if the PDFreactor Web Service is responsive and is able to convert documents.

Exceptions

Reasons:

The PDFreactor Web Service is running but not functional.
A response was received but it could not be identified as a response from the PDFreactor Web Service.
The PDFreactor Web Service could not be reached.

getVersion() → Version

Gets the version of the PDFreactor Web Service.

getDocumentUrl(documentId) → String

Returns the URL where the document with the given ID can be accessed.

Parameters

documentId → String: The document ID.

getProgressUrl(documentId) → String

Returns the URL where the progress of the document with the given ID can be accessed.

Parameters

documentId → String: The document ID.

headers → Array<String, String>

A collection of key-value-pairs representing the request headers that will be added to the HTTP request to the PDFreactor Web Service. This property is empty by default and additional headers can be added as required. Headers should only be added in special environments where it is necessary.

cookies → Array<String, String>

A collection of key-value-pairs representing the cookies that will be added to the HTTP request to the PDFreactor Web Service. This property is empty by default and additional cookies can be added as required. Cookies should only be added in special environments where it is necessary, e.g. when using a load balancer.

Models

Configuration

This class contains all options related to the PDF or image conversion. Only document is required, all other configuration settings are optional.

addAttachments → Boolean

Enables or disables attachments specified in style sheets.

The default value is false.

addBookmarks → Boolean

Enables or disables bookmarks in the PDF document.

The default value is false.

addComments → Boolean

Enables or disables comments in the PDF document.

The default value is false.

addLinks → Boolean

Enables or disables links in the PDF document.

The default value is false.

addOverprint → Boolean

Enables or disables overprinting.

The default value is false.

addPreviewImages → Boolean

Enables or disables embedding of image previews per page in the PDF document.

The default value is false.

addTags → Boolean

Enables or disables tagging of the PDF document.

The default value is false.

allowAnnotations → Boolean

Enables or disables the 'annotations' restriction in the PDF document.

The default value is false.

allowAssembly → Boolean

Enables or disables the 'assembly' restriction in the PDF document.

The default value is false.

allowCopy → Boolean

Enables or disables the 'copy' restriction in the PDF document.

The default value is false.

allowDegradedPrinting → Boolean

Enables or disables the 'degraded printing' restriction in the PDF document.

The default value is false.

allowFillIn → Boolean

Enables or disables the 'fill in' restriction in the PDF document.

The default value is false.

allowModifyContents → Boolean

Enables or disables the 'modify contents' restriction in the PDF document.

The default value is false.

allowPrinting → Boolean

Enables or disables the 'printing' restriction in the PDF document.

The default value is false.

allowScreenReaders → Boolean

Enables or disables the 'screen readers' restriction in the PDF document.

The default value is false.

appendLog → Boolean

Specifies whether or not the log data should be added to the PDF document.

The default value is false.

attachments → Array<Attachment>

Adds a file attachment to PDF document.

authenticationCredentials → KeyValuePair

Enables access to resources that are secured via Basic or Digest authentication.

author → String

Sets the value of the author field of the PDF document.

baseURL → String

Sets the base URL of the document.

To resolve relative URLs to absolute URLs a reference (base) URL is required. This reference URL is usually the system id of the document.

This method can be used to specify another reference URL. If this URL is not null then it will be used instead of the system id.

The default value is null.

bookletMode → BookletMode

Convenience method to set pages-per-sheet properties and page order in one step to create a booklet.

cleanupTool → Cleanup

Sets the cleanup tool to use for documents with unparsable content.

The Cleanup constants can be used as value. The default value specified is Cleanup::CYBERNEKO.

The cleanup tool is only used for Doctype::XHTML. HTML5 utilizes an internal cleanup.

conformance → Conformance

Sets the conformance of the PDF.

The Conformance constants can be used as value. The default value specified is Conformance::PDF.

continuousOutput → ContinuousOutput

Enables the conversion of the input document into one image.

conversionName → String

Sets a name for the conversion. If a name is set, it will be logged at level "info". The name can be an arbitrary string but should be unique for every conversion or application so that the log output can be matched to a specific conversion or application later.

cookies → Array<KeyValuePair>

Adds a cookie to all outgoing HTTP connections. The parameters are URL encoded (see rawCookies). If the key already exists, the pair is overwritten.

creator → String

Sets the value of creator field of the PDF document.

customDocumentProperties → Array<KeyValuePair>

Adds a custom property to the PDF document. An existing property of the same name will be replaced.

defaultColorSpace → ColorSpace

Sets whether to convert color key words to CMYK instead of RGB.

The ColorSpace constants can be used as value. The default value specified is ColorSpace::RGB.

disableFontEmbedding → Boolean

Sets whether fonts will not be embedded into the resulting PDF. Setting this to true will reduce the file size of the output document. However, the resulting PDF documents are no longer guaranteed to look identical on all systems.

The default value is false.

document → String

The input document. This can either be an URL, XML or HTML source code or a binary.

documentDefaultLanguage → String

Sets the language used for documents having no explicit language attribute set.

The language code is used to resolve the lang() selector correct and to determine the correct language used for hyphenation.

documentType → Doctype

Sets the document type.

The Doctype constants can be used to specify the document type. The default value specified is Doctype::AUTODETECT.

enableDebugMode → Boolean

Enables debug mode, which adds additional information to the output.

encoding → String

Sets the encoding of the document.

If this value is set to null or it is empty then the encoding will be detected automatically.

The default value is null.

encryption → Encryption

Sets the encryption.

Use one of the Encryption constants to specify the encryption. The default value is Encryption::NONE.

fontAliases → Array<Font>

Registers an alias font family for an existing font.

This function is limited to fonts loaded automatically from system folders.

fontFallback → Array<String>

Sets a list of fallback font families used for character substitution. This list is iterated for characters that can not be displayed with any of the fonts specified via the CSS property font-family.

fonts → Array<Font>

Loads a font from a URL which can be used via the CSS property font-family.

fullCompression → Boolean

Enables or disables full compression of the PDF document.

The default value is false.

httpsMode → HttpsMode

Sets the HTTPS mode. In closed environment lenient can be the preferred setting to avoid HTTPS issues that are not security critical

The default value specified is HttpsMode::STRICT.

ignoreAlpha → Boolean

Sets whether the alpha value of CSS RGBA colors is ignored. This can be used to avoid conformance issues in PDF/A-1.

integrationStyleSheets → Array<Resource>

Adds an integration style sheet to the document.

There are two ways to specify the style sheet:

Specifying the style sheet only using an URI.
Specifying the style sheet by the content of the style sheet and alternatively setting a URI to resolve relative elements. If no URI is specified then the system id/base URL of the document will be used.

javaScriptMode → JavaScriptMode

Sets the JavaScript Mode.

The default value specified is JavaScriptMode::DISABLED.

keepDocument → Boolean

If set to true prevents the document from being deleted from the PDFreactor Web Service after it has been accessed. This only works for asynchronous conversions.

keywords → String

Sets the value of the keywords field of the PDF document.

licenseKey → String

Sets the license key using a string. If the license key is set to null then PDFreactor looks for a 'licensekey.xml' file in the same directory where the 'PDFreactor.jar' file is located. If no license key could be found then PDFreactor runs in evaluation mode.

The default value is null.

logExceedingContent → LogExceedingContent

Whether to log content exceeding the page.

Use ExceedingContentAnalyze constants to specify which kind of content should be observed for exceeding content logging. The default value is ExceedingContentAnalyze::NONE.

Use ExceedingContentAgainst constants to specify that exceeding this content starts exceeding content logging. The default value is ExceedingContentAgainst::NONE.

logLevel → LogLevel

Sets the log level.

Use one of the LogLevel constants to specify the log level.

The default value is LogLevel::NONE.

mediaFeatureValues → Array<MediaFeatureValue>

Defines the value of a Media Feature which is used to resolve CSS3 media queries.

mediaTypes → Array<String>

Sets the media types that are used to resolve CSS3 media queries.

Please note that this overrides the default media types of PDFreactor, which are:

print, paged, visual, bitmap, static, -ro-pdfreactor

mergeByteArray → Base64

This method sets a byte array containing an external PDF document which will be merged with the PDF document generated by the XML source.

mergeByteArrays → Array<Base64>

This method sets an array of byte arrays that contain multiple external PDFs which will be merged with the PDF document generated by the XML source.

mergeMode → MergeMode

Sets the merge mode.

The following merge methods can be used:

append (MergeMode::APPEND)
prepend (MergeMode::PREPEND)
overlay above the content of the generated PDF (MergeMode::OVERLAY)
overlay below the content of the generated PDF (MergeMode::OVERLAY_BELOW)

The default value is MergeMode::APPEND.

mergeURL → String

This method sets a URL of an external PDF document which will be merged with the PDF document generated by the XML source.

mergeURLs → Array<String>

This method sets an array of URLs of external PDF documents which will be merged with the PDF document generated by the XML source.

outputFormat → OutputFormat

Sets the output format. The default value is PDF. For image formats the width or height in pixels must be specified. When either dimension is <1 it is computed based on the other dimension and the aspect ratio of the input document.

outputIntent → OutputIntent

Sets the output intent including the identifier and the ICC profile to be embedded into the PDF.

Set either the profile URL or the profile data, not both. Certain PDF/X formats require neither, just a known identifier.

overlayRepeat → OverlayRepeat

If one of the documents of an overlay process is shorter than the other, this method allows repeating either its last page or all of its pages in order to overlay all pages of the longer document.

Use one of the OBERLAY_REPEAT_ constants to specify the overlay repeat. The default value is OverlayRepeat::NONE.

ownerPassword → String

Sets the owner password of the PDF document.

The default value is null.

pageOrder → String | PageOrder

Sets the page order of the direct result of the conversion.

If mergeMode is set to MergeMode::ARRANGE, this method is also used to specify the position of inserted pages from an existing PDF.

A description of the syntax can be found in the manual.

pagesPerSheetProperties → PagesPerSheetProperties

Sets the properties of a sheet on which multiple pages are being arranged.

If cols or rows is less than 1, no pages-per-sheet processing is done. This is the case by default.

Use one of the PagesPerSheetDirection constants to specify the the direction. The default value is PagesPerSheetDirection::RIGHT_DOWN.

pdfScriptAction → Array<PdfScriptAction>

Sets a pair of trigger event and PDF script. The script is triggered on the specified event.

A PDF script is JavaScript that is executed by a PDF viewer (e.g. Adobe Reader). Note that most viewers do not support this feature.

PDF Scripts can also be set by using the proprietary CSS property pdf-script-action. More information on this property can be found in the manual.

Please note, that scripts set via CSS have a higher priority. If two scripts are registered on the same event, but one via API and the other via the CSS property, the script set in the CSS will override the other one.

pixelsPerInch → Integer

Sets the pixels per inch.

Changing this value changes the physical length of sizes specified in px (including those specified via HTML attributes).

The default value is 96ppi.

pixelsPerInchShrinkToFit → Boolean

Whether the pixels per inch should be adapted automatically to avoid content exceeding pages.

postTransformationDocumentType → Doctype

Sets the document type after the XSL-Transformations have been applied.

The Doctype constants can be used to specify the document type. The default value specified is Doctype::AUTODETECT.

printDialogPrompt → Boolean

Enables or disables a print dialog to be shown upon opening the generated PDF document by a PDF viewer.

The default value is false.

processingPreferences → Array<ProcessingPreferences>

Preferences that influence the conversion process without changing the output

Use the ProcessingPreferences constants to specify the processing preferences. By default no processing preference is set.

rawCookies → Array<KeyValuePair>

Adds a cookie to all outgoing HTTP connections. The parameters are not URL encoded (see cookies). If the key already exists, the pair is overwritten.

requestHeaders → Array<KeyValuePair>

Adds a request header to all outgoing HTTP connections. If the key already exists, the pair is overwritten.

resourceRequestTimeout → Integer

Sets a timeout in milliseconds for requests to resources, such as HTTP requests to style sheets, images etc. If the server does not respond until the timeout, the request will be aborted and the resource will not be loaded.

A timeout of 0 means that the request will not time out. A negative value means that no timeout will be set. The default value is 60000 (1min).

signPDF → SignPDF

Sets a digital certificate to sign the newly created PDF.

Requires a keystore file. The included certificate may be self-signed.

Use the KeystoreType constants to specify the keystore type.

Use the SigningMode constants to specify the signing mode.

subject → String

Sets the value of the subject field of the PDF document.

throwLicenseExceptions → Boolean

Whether an exception should be thrown when no legal full license key is set. This allows to programmatically ensure that documents are not altered due to license issues.

The default value is false.

title → String

Sets the value of the title field of the PDF document.

userPassword → String

Sets the user password of the PDF document.

The default value is null.

userScripts → Array<ScriptResource>

Adds an user script to the document.

There are two ways to specify the script:

Specifying the script only by an URI.
Specifying the script by the content of the script and alternatively setting a URI to resolve relative elements. If no URI is specified then the system id/base URL of the document will be used.

userStyleSheets → Array<Resource>

Adds a user style sheet to the document.

There are two ways to specify the style sheet:

Specifying the style sheet only using an URI.
Specifying the style sheet by the content of the style sheet and alternatively setting a URI to resolve relative elements. If no URI is specified then the system id/base URL of the document will be used.

viewerPreferences → Array<ViewerPreferences>

Sets the page layout and page mode preferences of the PDF.

Use the ViewerPreferences constants to specify the viewer preferences. By default no viewer preference is set.

xmp → Xmp

Sets custom XMP to be embedded into the PDF document.

If both content and URI are set to null no custom XMP is embedded. If priority is also set to XmpPriority::HIGH automatic generation of required XMP is also suppressed. This may cause output PDFs to not archive a specified conformance.

xsltMode → Boolean

Enables or disables XSLT transformations.

Set this value to true to enable XSLT transformations or to false to disable XSLT transformations.

The default value is false.

xsltStyleSheets → Array<Resource>

Adds an XSLT style sheet to the document.

There are two ways to specify the style sheet:

Specifying the style sheet only by an URI.
Specifying the style sheet by the content of the style sheet and alternatively setting a URI to resolve relative elements. If no URI is specified then the system id/base URL of the document will be used.

ExceedingContent

bottom → Boolean: Returns whether the content exceeds the page at the bottom.
box → Boolean: Returns whether the exceeding content is a box instead of text or image content.
containerBottom → Integer: Returns the bottom coordinate of the the container box in the page in pixels. Depending on the settings this box may be the page
containerLeft → Integer: Returns the left coordinate of the the container box in the page in pixels. Depending on the settings this box may be the page
containerRight → Integer: Returns the right coordinate of the the container box in the page in pixels. Depending on the settings this box may be the page
containerTop → Integer: Returns the top coordinate of the the container box in the page in pixels. Depending on the settings this box may be the page
description → String: Returns a description of the content. In case of text content, the text is returned. In case of images the URL is returned if available.
exceedingBoxBottom → Integer: Returns the bottom coordinate of the the exceeding box in the page in pixels.
exceedingBoxLeft → Integer: Returns the left coordinate of the the exceeding box in the page in pixels.
exceedingBoxRight → Integer: Returns the right coordinate of the the exceeding box in the page in pixels.
exceedingBoxTop → Integer: Returns the top coordinate of the the exceeding box in the page in pixels.
html → String: Returns the HTML of the box that contains the exceeding content.
left → Boolean: Returns whether the content exceeds the page to the left.
pageBottom → Integer: Returns the bottom coordinate of the the page in pixels.
pageLeft → Integer: Returns the left coordinate of the the page in pixels.
pageNumber → Integer: Returns the number of the page that contains the exceeding content.
pageRight → Integer: Returns the right coordinate of the the page in pixels.
pageTop → Integer: Returns the top coordinate of the the page in pixels.
path → Array<Integer>: Returns an array of integers denoting the indexes of the ancestors of the DOM node corresponding to the box containing the exceeding content, starting from below the root node down to the element itself.
right → Boolean: Returns whether the content exceeds the page to the right.
summary → String: Returns a summary of this exceeding content object.
top → Boolean: Returns whether the content exceeds the page at the top.

Log

records → Array<Record>: The log records.

Progress

finished → Boolean: Indicated whether the conversion is finished yet.
log → Log: The log of the conversion.
progress → Integer: The current progress of the conversion. The value is between 0 and 100.

Record

level → Integer: The level of the record.
message → String: The logged message.
timestamp → Integer: The timestamp.

Result

The result of a PDF or image conversion.

document → Base64: The resulting PDF or image as base64 encoded String.
documentArray → Array<Base64>: The resulting PDF or image as an array of base64 encoded Strings. This property is only present if the configuration option "asArray" was set to true
error → String: Returns the error messages that might have been generated during rendering.
exceedingContents → Array<ExceedingContent>: Provides information about content exceeding its page or parent. Depends on the mode set via "logExceedingContents".
log → Log: Returns the log messages generated during rendering based on the log level.
numberOfPages → Integer: Returns the number of pages of the document after conversion.
numberOfPagesLiteral → Integer: Returns the number of pages of the resulting PDF (including, e.g., merge operations), otherwise it will return the number pages of the laid out input document.

Version

build → Integer: The build number
major → Integer: The major version.
micro → Integer: The micro version
minor → Integer: The minor version
revision → String: The revision number

Attachment

data → Base64: The binary content of the attachment. May be null.
url → String: If data is null, the attachment will be retrieved from this URL. If this is "#" the input document URL is used instead.
name → String: The file name associated with the attachment. It is recommended to specify the correct file extension. If this is null the name is derived from the URL.
description → String: The description of the attachment. If this is null the name is used.

BookletMode

sheetSize → String: The size of the sheet as CSS value, e.g. A3, letter landscape, 15in 20in, 20cm 30cm.
sheetMargin → String: The sheet margin as CSS margin value, e.g. 1in, 1cm 1.5cm, 10mm 20mm 10mm 30mm. null is interpreted as 0mm.
rtl → Boolean: Whether or not the reading order of the booklet should be right-to-left.

ContinuousOutput

width → Integer: Equivalent to the width of a browser window (view port). Values <1 enable paginated output.
height → Integer: Equivalent to the height of a browser window (view port). For values <1 the entire height of the document is used.

Font

source → String: The name of an existing font family.
family → String: The alias name for that font.
bold → Boolean: Whether the alias will be labeled bold.
italic → Boolean: Whether the alias will be labeled italic.

KeyValuePair

key → String: The key
value → String: The value

LogExceedingContent

logExceedingContentAnalyze → ExceedingContentAnalyze: Enables logging of exceeding content and optionally of boxes.
logExceedingContentAgainst → ExceedingContentAgainst: Enables logging of exceeding content either against the page edges, page content areas or containers.

MediaFeatureValue

mediaFeature → MediaFeature: The media feature.
value → String: The value that is associated with the given media feature.

OutputFormat

type → OutputType: the output format. See OutputType constants
width → Integer: The with of the output in pixels (image formats only). Values <1 will be computed based on the specified height and the aspect ratio of the input document.
height → Integer: The height of the output in pixels (image formats only). Values <1 will be computed based on the specified width and the aspect ratio of the input document.
multiImage → Boolean: Indicates whether the image output will be paginated into multiple images.

OutputIntent

identifier → String | OutputIntentDefaultProfile: The identifier
data → Base64: The profile data
url → String: The profile URL

PagesPerSheetProperties

cols → Integer: The number of columns per sheet.
rows → Integer: The number of rows per sheet.
sheetSize → String: The sheet size as CSS size, e.g. A4, letter landscape, 15in 20in, 20cm 30cm.
sheetMargin → String: The sheet margin as CSS margin, e.g. 1in, 1cm 1.5cm, 10mm 20mm 10mm 30mm. null is interpreted as 0mm.
spacing → String: The horizontal and vertical space between pages on a sheet as CSS value, e.g. 0.1in, 5mm 2mm. null is interpreted as 0mm.
direction → PagesPerSheetDirection: The direction in which the pages are ordered on a sheet.

PdfScriptAction

triggerEvent → PdfScriptTriggerEvent: The event on which the script is executed. Value is a PdfScriptTriggerEvent constant.
script → String: The script source that should be executed.

Resource

content → String: The content of the style sheet.
uri → String: The URI of the style sheet.

ScriptResource

content → String: The content of the script.
uri → String: The URI of the script.
beforeDocumentScripts → Boolean: Use true to cause PDFreactor to run the script before all scripts inside the document and false to run it after.

SignPDF

keystoreURL → String: The URL to the keystore file.
keyAlias → String: The alias of the certificate included in the keystore to be used to sign the PDF.
keystorePassword → String: The password of the keystore.
keystoreType → KeystoreType: The format of the keystore, i.e. pkcs12 or jks. Use one of the KeystoreType constants as value.
signinMode → SigningMode: The mode that is used to sign the PDF, i.e. self-signed, Windows certificate or VeriSign. Use one of the SigningMode constants as value.

Xmp

content → String: XMP, as an XML string, to be embedded into the PDF document.
uri → String: URI to XMP to be embedded into the PDF document, if content is null.
priority → XmpPriority: Priority of this XMP over XMP generated automaticaly for the conformance requirements of certain output formats.

Cleanup

CYBERNEKO: Indicates that the CyberNeko HTML parser will be used to perform a cleanup when loading a non-well-formed document.
JTIDY: Indicates that JTidy will be used to perform a cleanup when loading a non-well-formed document.
NONE: Indicates that no cleanup will be performed when loading a document. If the loaded document is not well-formed, an exception will be thrown.
TAGSOUP: Indicates that tagsoup will be used to perform a cleanup when loading a non-well-formed document.

ColorSpace

CMYK: The color space CMYK
RGB: The color space RGB

Conformance

PDF: PDF with no additional restrictions (default)
PDFA1A: PDF/A-1a (ISO 19005-1:2005 Level A)
PDFA1A_PDFUA1: PDF/A-1a + PDF/UA-1 ....
PDFA1B: PDF/A-1b (ISO 19005-1:2005 Level B)
PDFA2A: PDF/A-2a (ISO 19005-2:2011 Level A)
PDFA2A_PDFUA1: PDF/A-2a + PDF/UA-1 ....
PDFA2B: PDF/A-2b (ISO 19005-2:2011 Level B)
PDFA2U: PDF/A-2u (ISO 19005-2:2011 Level U)
PDFA3A: PDF/A-3a (ISO 19005-3:2012 Level A)
PDFA3A_PDFUA1: PDF/A-3a + PDF/UA-1 ....
PDFA3B: PDF/A-3b (ISO 19005-3:2012 Level B)
PDFA3U: PDF/A-3u (ISO 19005-3:2012 Level U)
PDFUA1: PDF/UA-1 (ISO ...)
PDFX1A_2001: PDF/X-1a:2001 (ISO 15930-1:2001)
PDFX1A_2003: PDF/X-1a:2003 (ISO 15930-4:2003)
PDFX3_2002: PDF/X-3:2002 (ISO 15930-3:2002)
PDFX3_2003: PDF/X-3:2003 (ISO 15930-6:2003)
PDFX4: PDF/X-4 (ISO 15930-7:2008)
PDFX4P: PDF/X-4p (ISO 15930-7:2008)

Doctype

AUTODETECT: Indicates that the document type will be detected automatically. A document has the type Doctype::HTML5 if the name of the root element is "html" (ignoring case considerations). In all other cases the document type is Doctype::XML.
HTML5: Indicates that the document type will be set to HTML5. The HTML default style sheet is used and the document is loaded regarding style elements, style attributes and link stylesheets.
XHTML: Indicates that the document type will be set to XHTML. The HTML default style sheet is used and the document is loaded regarding style elements, style attributes and link stylesheets.
XML: Indicates that the document type will be set to generic XML. No default style sheet is used and the document is loaded as is without regards to style elements or attributes.

Encryption

NONE: Indicates that the document will not be encrypted. If encryption is disabled then no user password and no owner password can be used.
TYPE_128: Indicates that the document will be encrypted using RC4 128 bit encryption. For normal purposes this value should be used.
TYPE_40: Indicates that the document will be encrypted using RC4 40 bit encryption.

ExceedingContentAgainst

NONE: Do not log exceeding content
PAGE_BORDERS: Log content exceeding the edges of its page
PAGE_CONTENT: Log content exceeding its page content area (overlaps the page margin)
PARENT: Log content exceeding its container

ExceedingContentAnalyze

CONTENT: Log exceeding content
CONTENT_AND_BOXES: Log exceeding content and all boxes
CONTENT_AND_STATIC_BOXES: Log exceeding content and boxes without absolute positioning
NONE: Do not log exceeding content

HttpsMode

LENIENT: Indicates lenient HTTPS behavior. This means that many certificate issues are ignored.
STRICT: Indicates strict HTTPS behavior. This matches the default behavior of Java.

JavaScriptMode

DISABLED: Indicates that JavaScript is disabled.
ENABLED: Indicates that JavaScript is enabled.
ENABLED_NO_LAYOUT: Indicates that JavaScript is enabled, without access to layout data.
ENABLED_REAL_TIME: Indicates that JavaScript is enabled, without converter-specific optimizations to timeouts and intervals. This mode is significantly more time consuming and should only be used when no other mode provides the expected results.
ENABLED_TIME_LAPSE: Indicates that JavaScript is enabled, with time stamps increasing more quickly. This makes some kinds of JS based animations (e.g. when using jQuery) finish immediately, which has the same effect as JavaScriptMode::ENABLED_REAL_TIME, but is significantly faster. Only Date.getTime() is affected by this.

KeystoreType

JKS: Keystore type "jks"
PKCS12: Keystore type "pkcs12"

LogLevel

DEBUG: Indicates that debug, info, warn and fatal log events will be logged.
FATAL: Indicates that only fatal log events will be logged.
INFO: Indicates that info, warn and fatal log events will be logged.
NONE: Indicates that no log events will be logged.
PERFORMANCE: Indicates that all log events will be logged.
WARN: Indicates that warn and fatal log events will be logged.

MediaFeature

ASPECT_RATIO

CSS 3 Media Feature describing the aspect ratio of the page content.

By default, this value is computed using the values of MediaFeature::WIDTH and MediaFeature::HEIGHT. Setting a specific value does override the computed value.

COLOR

CSS 3 Media Feature describing the number of bits per color component.

Default value is 8.

COLOR_INDEX

CSS 3 Media Feature describing the number of entries in the color lookup table.

Default value is 0, as there is no color lookup table.

DEVICE_ASPECT_RATIO

CSS 3 Media Feature describing the aspect ratio of the page.

By default, this value is computed using the values of MediaFeature::DEVICE_WIDTH and MediaFeature::DEVICE_HEIGHT. Setting a specific value does override the computed value.

DEVICE_HEIGHT

CSS 3 Media Feature describing the height of the page.

The default height is that of a DIN A4 page (297mm).

DEVICE_WIDTH

CSS 3 Media Feature describing the width of the page.

The default width is that of a DIN A4 page (210mm).

GRID

CSS 3 Media Feature defining whether the output is grid-based.

Default value 0, as PDFs are not grid-based.

HEIGHT

CSS 3 Media Feature height of page content.

The default height is that of a DIN A4 page with 1cm margin (277mm).

MONOCHROME

CSS 3 Media Feature describing the number of bits per pixel in a monochrome frame buffer.

Default value is 0, as the device is not monochrome.

ORIENTATION

CSS 3 Media Feature describing the page orientation.

By default, this value is computed using the values of MediaFeature::WIDTH and MediaFeature::HEIGHT. Setting a specific value does override the computed value.

Valid values are "portrait" or "landscape"

RESOLUTION

CSS 3 Media Feature describing the resolution of the output device.

This also defines the value of the window.devicePixelRatio property available from JavaScript.

Default value is 2dppx.

WIDTH

CSS 3 Media Feature width of page content.

The default width is that of a DIN A4 page with 1cm margin (190mm).

MergeMode

APPEND: Default merge mode: Append converted document to existing PDF
ARRANGE: Advanced merge mode: Allows to insert specific pages from existing PDFs into the converted document. This is done via a special syntax of pageOrder.
OVERLAY: Alternate merge mode (overlay): Adding converted document above the existing PDF
OVERLAY_BELOW: Alternate merge mode (overlay): Adding converted document below the existing PDF
PREPEND: Alternate merge mode: Prepend converted document to existing PDF

OutputIntentDefaultProfile

FOGRA39: "Coated FOGRA39" output intent default profile
GRACOL: "Coated GRACoL 2006" output intent default profile
IFRA: "ISO News print 26% (IFRA)" output intent default profile
JAPAN: "Japan Color 2001 Coated" output intent default profile
JAPAN_NEWSPAPER: "Japan Color 2001 Newspaper" output intent default profile
JAPAN_UNCOATED: "Japan Color 2001 Uncoated" output intent default profile
JAPAN_WEB: "Japan Web Coated (Ad)" output intent default profile
SWOP: "US Web Coated (SWOP) v2" output intent default profile
SWOP_3: "Web Coated SWOP 2006 Grade 3 Paper" output intent default profile

OutputType

BMP: BMP output format
GIF: GIF output format
JPEG: JPEG output format
PDF: PDF output format
PNG: PNG output format (using Java Image I/O)
PNG_AI: PNG output format (using Apache Imaging)
PNG_TRANSPARENT: Transparent PNG output format (using Java Image I/O)
PNG_TRANSPARENT_AI: Transparent PNG output format (using Apache Imaging)
TIFF_CCITT_1D: Monochrome CCITT 1D compressed TIFF output format
TIFF_CCITT_GROUP_3: Monochrome CCITT Group 3 compressed TIFF output format
TIFF_CCITT_GROUP_4: Monochrome CCITT Group 4 compressed TIFF output format
TIFF_LZW: LZW compressed TIFF output format
TIFF_PACKBITS: PackBits compressed TIFF output format
TIFF_UNCOMPRESSED: Uncompressed TIFF output format

OverlayRepeat

ALL_PAGES: All pages of the shorter document are repeated, to overlay all pages of the longer document
LAST_PAGE: Last page of the shorter document is repeated, to overlay all pages of the longer document
NONE: No pages of the shorter document are repeated, leaving some pages of the longer document without overlay
TRIM: The resulting PDF is trimmed to the number of pages of the shorter document

PageOrder

BOOKLET: Page order mode to arrange all pages in booklet order
BOOKLET_RTL: Page order mode to arrange all pages in right-to-left booklet order
EVEN: Page order mode to keep even pages only
ODD: Page order mode to keep odd pages only
REVERSE: Page order mode to reverse the page order

PagesPerSheetDirection

DOWN_LEFT: Arranges the pages on a sheet from top to bottom and right to left.
DOWN_RIGHT: Arranges the pages on a sheet from top to bottom and left to right.
LEFT_DOWN: Arranges the pages on a sheet from right to left and top to bottom.
LEFT_UP: Arranges the pages on a sheet from right to left and bottom to top.
RIGHT_DOWN: Arranges the pages on a sheet from left to right and top to bottom.
RIGHT_UP: Arranges the pages on a sheet from left to right and bottom to top.
UP_LEFT: Arranges the pages on a sheet from bottom to top and right to left.
UP_RIGHT: Arranges the pages on a sheet from bottom to top and left to right.

PdfScriptTriggerEvent

AFTER_PRINT: This event is triggered after the PDF has been printed by the viewer application.
AFTER_SAVE: This event is triggered after the PDF has been saved by the viewer application.
BEFORE_PRINT: This event is triggered before the PDF is printed by the viewer application.
BEFORE_SAVE: This event is triggered before the PDF is saved by the viewer application.
CLOSE: This event is triggered when the PDF is closed by the viewer application.
OPEN: This event is triggered when the PDF is opened in the viewer application.

ProcessingPreferences

SAVE_MEMORY_IMAGES: Processing preferences flag for the memory saving mode for images.

SigningMode

SELF_SIGNED: Signing mode for self-signed certificates.
VERISIGN_SIGNED: Signing mode for VeriSign certificates.
WINCER_SIGNED: Signing mode for Windows certificates.

ViewerPreferences

CENTER_WINDOW: Position the document's window in the center of the screen.
DIRECTION_L2R: Position pages in ascending order from left to right.
DIRECTION_R2L: Position pages in ascending order from right to left.
DISPLAY_DOC_TITLE: Display the document's title in the top bar.
DUPLEX_FLIP_LONG_EDGE: Print dialog default setting: duplex (long edge)
DUPLEX_FLIP_SHORT_EDGE: Print dialog default setting: duplex (short edge)
DUPLEX_SIMPLEX: Print dialog default setting: simplex
FIT_WINDOW: Resize the document's window to fit the size of the first displayed page.
HIDE_MENUBAR: Hide the viewer application's menu bar when the document is active.
HIDE_TOOLBAR: Hide the viewer application's tool bars when the document is active.
HIDE_WINDOW_UI: Hide user interface elements in the document's window.
NON_FULLSCREEN_PAGE_MODE_USE_NONE: Show no panel on exiting full-screen mode. Has to be combined with ViewerPreferences::PAGE_MODE_FULLSCREEN.
NON_FULLSCREEN_PAGE_MODE_USE_OC: Show optional content group panel on exiting full-screen mode. Has to be combined with ViewerPreferences::PAGE_MODE_FULLSCREEN.
NON_FULLSCREEN_PAGE_MODE_USE_OUTLINES: Show bookmarks panel on exiting full-screen mode. Has to be combined with ViewerPreferences::PAGE_MODE_FULLSCREEN.
NON_FULLSCREEN_PAGE_MODE_USE_THUMBS: Show thumbnail images panel on exiting full-screen mode. Has to be combined with ViewerPreferences::PAGE_MODE_FULLSCREEN.
PAGE_LAYOUT_ONE_COLUMN: Display the pages in one column.
PAGE_LAYOUT_SINGLE_PAGE: Display one page at a time. (default)
PAGE_LAYOUT_TWO_COLUMN_LEFT: Display the pages in two columns, with odd numbered pages on the left.
PAGE_LAYOUT_TWO_COLUMN_RIGHT: Display the pages in two columns, with odd numbered pages on the right.
PAGE_LAYOUT_TWO_PAGE_LEFT: Display two pages at a time, with odd numbered pages on the left.
PAGE_LAYOUT_TWO_PAGE_RIGHT: Display two pages at a time, with odd numbered pages on the right.
PAGE_MODE_FULLSCREEN: Switch to fullscreen mode on startup.
PAGE_MODE_USE_ATTACHMENTS: Show attachments panel on startup.
PAGE_MODE_USE_NONE: Show no panel on startup.
PAGE_MODE_USE_OC: Show optional content group panel on startup.
PAGE_MODE_USE_OUTLINES: Show bookmarks panel on startup.
PAGE_MODE_USE_THUMBS: Show thumbnail images panel on startup.
PICKTRAYBYPDFSIZE_FALSE: Print dialog default setting: do not pick tray by PDF size
PICKTRAYBYPDFSIZE_TRUE: Print dialog default setting: pick tray by PDF size
PRINTSCALING_APPDEFAULT: Print dialog default setting: set scaling to application default value.
PRINTSCALING_NONE: Print dialog default setting: disabled scaling

XmpPriority

HIGH: Embed XMP ignoring requirments of the output format. This may cause output PDFs to not archive a specified conformance.
LOW: Embed XMP if the output format does not have XMP requirments.
NONE: Do not embed XMP.